Digital Protractor
An Official of Niigata Seiki in Vietnam
Digital Protractor
Digital Protractor is a familiar mechanical device in machining workshops or factories. For an accurate, fast, and easy measurement result.
Introduction of the Digital Protractor
Digital Protractor is a product line, equipment manufactured by Niigata Seiki – Japan
Features of the Digital Protractor
- High hardness, no wear, and rust after a long time of use
- Niigata Seiki ruler is used to measure angles in many modern industries such as mechanical engineering, machine repair, …
- The ruler has a simple, compact design that is safe to use
- Can be moved and stored easily
- The parameters printed on the ruler are clear and sharp, helping to read the measurement results quickly and accurately
- Carefully machined ruler head ensures safety when using
Types of Digital Protractor
Digital Protractor DP-10XY series
- Surface plate and machine tool angle of inclination measurement
- Material:
+ Case: Aluminum
+ Base: Aluminum alloy - Simultaneously measures the angle of inclination in X and Y directions making leveling tasks easier
- The display is switchable to show only X, only Y, or XY measurements
- Measured value on angle sensor (built-in) is to be output and shown on PC
- Back-light display
- The custom-made base can be attached to the threaded screw holes (M5 x P0.8) at the bottom base
Digital Protractor DP-10S / 10D set series
- Surface plate and machine tool angle of inclination measurement
- Material:
+ DP-10S…Case: Aluminum, Base: Aluminum alloy
+ DP-10D…Case: ABS - Simultaneously measures the angle of inclination in X and Y directions making leveling tasks easier
- 0-cal. and 1/2 cal switches allow calibration at the touch of a button
- Output from sensors can also be displayed and recorded on a PC
- DP-10S has threaded screw holes (M5 x P0.8) at the bottom base for attaching the custom-made base to the product
Digital Level Sensor DP-10M series
- Sensors for measurement and control of the angle of inclination in machine tools, construction machinery, structures, etc.
- Material: Case: Aluminum
- Simultaneously measures the angle of inclination in X and Y directions
- When power is applied, the angle of inclination is output via RS-232C signal (power and output connection via terminal block)
- Output from sensors can also be displayed or recorded on PC with dedicated software
Digital Protractor DP-50
- For the angle of tilt measurement
- Material: Body: Aluminum
- A digital inclinometer is a useful tool for every site
- Slit encoder ensures accuracy and stability
- Zero setting not required
- Display hold function
- Measuring face: V grooved (2 sides)
- Magnetic vertical measuring face
- Display unit: DEG
Digital Protractor DP-90G
- For inclination measurement
- Material: Body: Aluminum
- Digital inclinometer with a wide range of measurement (90°)
- Display reverses automatically when turned upside down
- With backlight (auto light off after approx. 1 min.)
- Display hold function
- Measuring surface: V grooved, with magnet
- Auto power off function (after approx. 6 min.)
- Notification tones for 0°, 90°and for 0%, 0 mm/m
Digital Protractor DP-30XY
- Digital inclinometer for precision angle measurement and working reference for assembling of machinery, tooling, jigs, etc.
- Material:
+ Case: Aluminum
+ Base: Aluminum alloy (with magnet) - Touch-panel color LCD
- Auto power off, auto display off function
- Zero position can be set at any angle
- Two-axis can measure X and Y directions at the same time
Bevel Box BB-180 series
- For all processes that require precise angle measurements, such as assembly, molding, machining, and fixtures
- Material:
+ BB-180: Aluminum frame, Plastic face / back, magnet on base
+ BB-180A & BB-180L: Body: Aluminum (with magnet on base) - Zero settings at the desired position
- Auto power off function (after approx. 5 min.)
- “Hold” button to fix reading on the display (BB-180A)
- Large LCD with backlight for easy reading in a dark place (BB-180L)
