Levelnic
An official Distributor of Niigata Seiki in Vietnam
Levelnic
Levelnic is an electronic measuring device used to measure the flatness, levelness and straightness of equipment and machinery.
Introduction of Levelnic
Levelnic are a product line and equipment manufactured by Niigata Seiki – Japan.
Features of Levelnic
- Digital display is used to obtain results faster than bubble tubes
- The instrument is made of materials such as aluminum, cast iron, steel, etc.
- Easy and convenient to use
- Useful for measuring flatness and straightness of working machines
- For surface plates and machine tools, etc., it can be measured with high accuracy
Handling instruction for Levenic
- Levelnic is a precision instrument. Please handle with care and avoid shock such as bumping or dropping.
- Before use, the levelnic base and the surface to be measured should be wiped clean of any dirt or oil using a paper towel or cloth dampened with ligroin or alcohol.
- There should be no temperature difference between levelnic and surface being measured. In eneral, precision measurements should be done in a temperature controlled environment.
- After use, the levelnic base should be coated with an anti-rust oil to protect from corrosion.
Types of Levelnic
Levelnic DL-S4W series
- The latest model of Levelnic series. Built-in wireless.
- Measurement value can be checked both on PC screen and the device’s display panel
- Resolution 0.001mm/m
- Switchable between wired and wireless
- Stainless steel base type that not requires rust prevention maintenance (DL-S4W SUS）
- USE
● High precision leveling of machine tools and surface plates. Straightness and flatness measurement. - MATERIAL
●Body: Aluminum - FEATURES
● Wireless data transmission
● PC screen becomes display of Levelnic
● Measurement data can be displayed on PC, using receiver and data display software
● Switchable between wireless / wired for saving of electricity and long-time use
● USB receiving unit installed. The driver is supported by the automatic recognition system.
● Equipped with two rechargeable batteries, enables running measuring by using a spare battery while the other is being charged
● Custom-made base can be attached to the threaded screw holes (M5 × P0.8) at the bottom base
DL-S4W
Levelnic DL-S3 series
- High accuracy Level with simple & clear operation.
- The world’s first Digital Level with built-in Microcomputer
- Resolution 0.001mm/m
- Rechargable Battery（DL-S3C / DL-S3C SUS）
- Stainless steel base type that not requires rust prevention maintenance (DL-S3 SUS / DL-S3C SUS）
- USE
● High precision leveling of machine tools and surface plates.
● Straightness, flatness and vertical measurement. - MATERIAL
● Body: Aluminum - FEATURES
● Easy to fix the datum point, divide measurement value into halves with one-touch operation (with “0” cal. switch, 1/2 cal. switch）
● Measurement value can be output with RS232 signal
● Custom-made base can be attached to the threaded screw holes (M5 × P0.8) at the bottom base
● DL-S3C is rechargeable type. It can be charged when not in use.
DL-S3
Levelnic DL-S3L
- LEVELNIC DL-S3 with magnetic L-type base.
- Magnetic base enables Z-axis measurement in addition to X-axis and Y-axis.
- USE
● High precision leveling of machine tools and surface plates.
● Straightness, flatness and vertical measurement. - MATERIAL
● DL-S3 / Body: Aluminum
● L-type base: Cast iron - FEATURES
● Quick digital display of the measured value
● Measurement value can be output with RS-232 signal
● L-type magnetic base enables vertical (Z-axis) measurement
● With 130°V groove - POWER
● 9V dry cell 1pc
● AC adapter (DC9V output ・ AC100V～240V） - ACCESSORIES
● Shock resistant aluminum case
● Warranty ・ Instruction manual ・ Inspection report
● AC adapter (DC9V output ・ AC100V～240V）
● 9V dry cel
DL-S3L
L-Type base for Levelnic DL-SL
- LEVELNIC DL-S4 series, DL-S3 series, DL-S2W series, equipped with L-type base enables measurement in the Z-axis in addition to X-axis and Y-axis
- USE
● L-type base for Levelnic - MATERIAL
● Cast iron - FEATURES
● Applicable Levelnic: DL-S4W series, DL-S3 series, DL-S2W series
● Vertical (Z-axis) measurement is available by applicable Levelnic mounted on
● L-type magnetic base enables vertical (Z axis) measurement
● With 130° V groove - ACCESSORIES
● Shock resistant aluminum case
DL-SL
Levelnic DL-S2W series
- Wireless Data transmission.
- Same specification as DL-S3, and wireless system equipped.
- The maximum longitudinal coverage is 50 ～ 100m.
- High precision Digital Level (Wireless by Bluetooth）
■ Resolution 0.001mm/m
■ Stainless steel base type that not requires rust prevention maintenance (DL-S2W SUS /DL-S2W (USB) SUS） - USE
● High precision leveling of machine tools and surface plates.
● Straightness, flatness and vertical measurement. - MATERIAL
● Body: Aluminum - FEATURES
● Wireless data transmission
● Wireless type Levelnic, useful for leveling and tilt measurement;
– In overhead location
– In places where the cable can not reach
● PC screen becomes display of Levelnic
– Measurement data can be displayed on PC, using receiver and data display software
● Custom-made base can be attached to the threaded screw holes (M5 × P0.8) at the bottom base
※ This model does not have display on the unit. PC or display unit is required for display the measured values
DL-S2W
Levelnic DL-m1 series
- Digital display with 0.01mm/m resolution.
- Unlike bubble level, there is no delay waiting for reading to settle, reducing human error
- High precision Digital Level
- Stainless steel base type (DL-m1 SUS）
- USE
● High precision leveling of machine tools and surface plates.
● Straightness and flatness measurement. - MATERIAL
● Body: Aluminum - FEATURES
● Compact, lightweight and simple operation
● Easy to fix the datum point, divide measurement value into half with one touch operation
● Fast output reduces installation time for field work
DL-m1
Levelnic DL-m3 series
- Digital display with 0.01mm/m resolution.
- Unlike bubble level, there is no delay waiting for reading to settle, reducing human error.
- Stainless steel base type (DL-m3 SUS)
- USE
● High precision leveling of machine tools and surface plates.
● Straightness and flatness measurement. - MATERIAL
● Body: Aluminum - FEATURES
● Digital display for easy to read measurement
● Compact, lightweight and simple operation
● Equipped with RS-232C output for combination use of Data recording, Straightness and Flatness software
DL-m3
Levelnic D L- m3LS
- Levelnic DL-m3 on L-type Base.
- X-axis, Y-axis as well as Z-axis measurements are possible.
- USE
● High precision leveling of machine tools and surface plates.
● Straightness, flatness and vertical measurement. - MATERIAL
● Body: Aluminum (DL-m3)
● L-type base: Cast iron - FEATURES
● Digital display
● Compact and lightweight
● Equipped with RS-232C output for combination use of Data recording, Straighness and Flatness software
● L-type base allows measurements in the vertical direction
● With 130° V groove - ACCESSORIES
● Shock resistant aluminum case
● Warranty ・ Instruction manual ・ Inspection report
● 9V dry cell
DL – M3LS
L-Type base for Levelnis DL-mL
- Levelnic DL-m1, m3 mounted on base will be able to take vertical measurements
- USE
● L-type base for Levelnic - MATERIAL
● Cast iron - FEATURES
● Applicable Levelnic: DL-m1 series, DL-m3 series
● V ertical (Z-axis) measurement is available by applicable Levelnic mounted on
● With 130° V groove - ACCESSORIES
● Shock resistant aluminum case
DL-mL
Bluetooth Box
- Attach Bluetooth Box to applicable levelnic for wireless data transmitting.
- Can be functioned in any countries by using Bluetooth dongle.
- USE
● Wireless data transmitting is available by attaching to applicable Levelnics - MATERIAL
● Body: Aluminum
● Switch Panel: ABS - FEATURES
● RS-232C output signal from Levelnic is transmitted by Bluetooth
● Can be used in any country with a locally available dongle
● Eliminating cables greatly improves work efficiency
DTW – DL
Mounting example to DL-S3
Levelnic wireless adapter DL-BW / DL- BW (USB)
- Allows communicating with Levelnic using Bluetooth.
- Wireless range of 50-100mm line-of-sight.
- USE
● Wireless adapter for Levelnic - MATERIAL
● Body: Stainless - FEATURES
● The RS232C output signal is transmitted using Bluetooth wireless
● Eliminating cables greatly improves work efficiency
DL – BW
Transmitter / Display set
- For displaying measurements from two DL-S3 series products in one handy device at the same time.
- Suitable for X and Y direction measurement.
- USE
● Transmit and display measurements for up to two Levelnic DL-S3 series products - FEATURES
● Simultaneous display of two connected DL-S3 series products. Useful for measuring X and Y directions.
● Eases installation of large machine tools by allowing multiple operators to work at same time
● Measured data is more easily visible, especially when used in locations which are remote or have low clearance height
● Since transmitter and receiver are a paired set, there is no needto set up after purchase — it can be used immediately
DL – D5
Levelnic display
- Can display data at a distance. Enables measurement process to be done by one person.
- The work for two can be done by one person
- USE
● Levelnic measurement data display - MATERIAL
● Body: Stainless steel - FEATURES
● Can divide measurement value into half with one-touch operation (DL-S2W series only）
DL – D4
Levelnic data system
- Enables data display and saving of up to eight Levelnic with one PC
- USE
● For data management of multiple Levelnics - MATERIAL
● Body: Stainless steel - FEATURES
● Eight Levelnics can be connected at once
● Data display & recording software included (auto capture function）
DL – ADP
Levelnic SD logger 3
- Measured value is recorded directly on SD card.
- Loading data automatically at a specific interval by script function.
- USE
● To record measured value by Levelnic.
● Measured value can be recorded on SD card without PC - FEATURES
● To record data on sites that PC is not suitable
● Recorded data by text format can be used with other software
● Loading data automatically at a specific interval by script written in advance on SD card
● Paperless by saving data on SD card
DT – MCK3 – XS – SK
Separate system / Levelnic cable
- High accuracy Digital Level
- USE
● High precision leveling of machine tools and surface plates.
● Straightness and flatness measurement for digital display. - MATERIAL
● Body: Aluminum
● Sensor base: Cast iron - FEATURES
● Display allows machine tool data obtained by Levelnic to be close at hand
● Output data is available on built in RS-232C interface for connection to computer or printer
● Multiple output signals can be combined onto one signal allowing expansion to 2, 3, or 4 devices for easy processing
● Easy to fix the Datum point, divide measurement value into half with one touch operation
●Custom-made base can be attached to the threaded screw holes (M5 × P0.8 at the bottom base - Resolution 0.001mm/m
PC connection cable:
- USE
● For connecting Levelnic to PC - SPECIFICATIONS
● Length: φ3mm×5m
●9 pins connector ( serial port connection）
● Applicable Levelnic: DL-S4W series, DL-S3 series, DL-S3L, DL-m3 series, DL-m3L, Separate system
※ PC without D-USB pin port (RS-232C) requires USB serial transmitter (optional）
Levelnic DL - S1
- Digital display with 0.01mm/m resolution.
- Unlike bubble level, there is no delay waiting for reading to settle, reducing human error
- High precision Digital Level
- USE
● High precision leveling of machine tools and surface plates, straightness and flatness measurement - MATERIAL
● Body: Aluminum
● Base: Cast iron - FEATURES
● Faster response than bubble level
● Wider range of measurement than conventional level
● Measurement can be taken in difficult-to-see position by pressing hold switch and then reading
DL – S1
Levelnic EL-01A series
- High-sensitie ( resolution 0.01mm/m )
- Pendulum type level with analog output.
- Three levels of sensitivity
- High precision Analog Level
- USE
● Leveling of machine tools and surface plates.Straightness and flatness measurements. - MATERIAL
● Body: Aluminum - FEATURES
● Quicker response than bubble level
● Sensitivity is switchable in three steps
● Connectible directly to commonly-available analog recorder through analog output
● Custom-made base can be attached to the threaded screw holes ( M5 × P0.8) at the bottom base
● Pendulum system prevents any hysteresis errors and is not influenced by temperature change
EL – 01A
Connection Cable / EL-K2:
- USE
● Connects to analog recorder with analog output of EL-01A - SPECIFICATIONS
● Length: φ3 × 5m
● Recorder: Banana plug
● Levelnic: M3 plug
Levelnic base with adjustable pitch
- By attaching Levelnic to this base, any desired measurement pitch can be set
- USE
● Setting a fixed pitch for straightness and flatness measurements - MATERIAL
● Carbon steel for machine structural use - FEATURES
● Applicable levelnic: DL-S4 series, DL-S3 series, DL-S2W series, DL-S2, EL-01A series
● The base is graduated in mm and enables setting measurement pitch
● Measuring face consists of 2 pcs of 15mm Gauge block
LP – 300
Carrying case for Levelnic
- Shock resistant aluminum case for Levelnic.
- Suitable for storage and carrying.
- USE
● Carrying case for Levelnic ( Levelnic is a precision instrument, we recommend that you use a carrying case） - MATERIAL
● Body: Aluminum
● Inside: Urethane foam - FEATURES
● Applicable levelnic:
– LV-CS3: DL-S4W series, DL-S3 series, DL-S2W serires, DL-S2
– LV-CM1: DL-m1 series, DL-m3 series
● Shock protection during transport
LV -CS3 / LV – CM1
