Measurement of Diameter and Length

Measurement of Diameter and Length


Bieu tuong - 1

DIATEST offers several solutions for comparative measurement of diameters and lengths:

  • The hand measuring tools Plug Gauge BMD, Split-Ball, Plunger Probe and Chamfer Probe
  • The flexible measuring table DIA-COME

Besides lengths, I.D and O.D, some of these solutions can also measure conicities, grooves, recesses, concentricities etc.vv

 

 

 

BMD – Plug Gauge DIATEST

Specification:
– Static and dynamic measurement
– Detection of dimensional deviations and shape defects
– As a hand tool in bores directly at the machine
– Fitting in measuring fixtures and machines
The selection of gauging contact material depends on composition and design of the work piece: Carbide, Hard chrome, Ceramic, Ruby, Plastic, Diamond.
– Standard- und Through bores: from 2.0 to 270 mm,
– Measurement of Blind Bores(Flat-Bottom): from 2,0 (T-BMD-FB) to 150 mm,
– Measurement of O.D.: from 20 to 100 mm,
– Multiplane plug gauges: from 21 mm,
– Internal gear gauges: from 10 mm cylinder diameter
– 3-Point Measurement: from 8.0 to 100 mm
– For very small diameters from 2.0 mm to 3.0 mm
– Measurement of parallel distances: from 1.0 (T-BMD-PA) to 30 mm
– Special sizes,shapes and models, e, g. tapered bores
More information: Catalogue

   Chamfer Gauges

Specification:
Indicating measuring instruments for diameter measurement of conical bores, external cones or 45° chamfers.
Internal Taper Gauges IKT: measure the largest diameter of a conical bore or a conical groove
– IKT60 for cone < 60° = Measuring range 0.5 to 121 mm, several instruments needed

– IKT90 for cone < 60° and > 90°= Measuring range 0.5 to 120 mm, several instruments needed

– IKT127 for cone < 90° and => 127° = Measuring range 0.5 to 121 mm, several instruments needed

– Calibration at factory or with setting master
External Taper Gauges AKT: measure the smallest diameter of an external cone.
– AKT60 for cone < 60° = Measuring range 5 to 121 mm, several instruments needed

– AKT90 for cone > 60° and < 90° = Measuring range 5 to 120 mm, several instruments needed

– AKT127 for cone > 90° and <127° = Measuring range 5 to 120 mm, several instruments needed

– Calibration at factory or with setting master
More information Catalogue

Split Ball Probe

Specification:
The modular design with extensive accessories enables gauging of most common bores. This allows a use for serial and individual control as well as preferentially in the plant directly at the production machine.

Range of application:
– Standard probes, hard chrome plated: Ø 0.47 – 41.1mm
– Standard probes, carbide inserted:Ø 1.5 – 41.1 mm
– Standard probes, ceramic inserted: Ø 3.7 – 41.1 mm
– Blind bore probes, hard chrome plated: Ø 1.5 – 41.1 mm
– T-3P: 3 – Point probes: Ø 4.75 – 150.6 mm
– T-T: probes to measure deeper bores: Ø 2.05 – 9.8 mm
– T-PA: probes for parallel measurement: Ø 4.7 – 41.1 mm
– Special shapes on request, respectively measurement of O.D., recesses, etc
– Zero setting in setting master e. g. according to DIATEST company standard or DN 2250-C
More information: Catalogue

 

 

Plunger probe

Specification:
Features of the indicating 2-point gauges are easy handling, adaptability to most bore gauging applications and large measuring ranges. They are often used for single measurement of larger diameters.
Range of application:
– Standard plunger probes: Ø 19.5 – 332.0 mm (0.768 – 13.071 Inch)
– Blind bore style (FB): Ø 38.5 – 343.0 mm (1.516 – 13.504 Inch)
The standard plunger probes are produced in four different sizes (MK5, MK6, MK7-plus and MK8-plus). The blind bore styled plunger probes are offered in two different designs (MK6FB and MK8FB)
Accuracy of standard style: repeatability is = < 1 um

Zero setting of the gauge can be made in a setting ring, slip gauge, setting device or a centering disk which is clamped onto a micrometer spindle (not suited for style FB).

More information: Catalogue

 

DIA-COME

Specification:
Flexible und sturdy measuring tables for measurement of I.D. and O.D.
DIA-COME measuring tables are offered in different sizes, layouts and measuring ranges.
They are often used close to the production machine, e. g. for measurement of samples.
DIA-COME C2 measuring tables are available in 3 sizes. They have a fixed and a moving measuring contact. Measuring range of the moving contact is 20 mm. The C2 tables cover different measuring ranges:
– I.D. from 30 – 275 mm
– O.D. from 0 – 245 mm
– Internal gear gauge Mi = 70 – 275 mm
– External gear gauge Ma = 0 – 245 mm
DIA-COME C3 measuring tables are available in 4 sizes. They have two fixed and one moving measuring contact. Measuring range of the moving contact is 20 mm. The C3 tables cover different measuring ranges:
– I.D. from 35 – 450 mm
– O.D. from 0 – 420 mm
In order not to distort or damage the work piece the measuring force can be continuously adjusted. Measuring accuracy is ± 2 μm.
More information: Catalogue

 

error: Content is protected !!