Cyclic Corrosion Test Chambers


Introduction of the Cyclic Corrosion Test Chambers

Ascott CCT chambers are designed to be flexible enough to comply with as many different CCT specifications as possible.

Cyclic Corrosion Test Chambers CC1000iPb

Cyclic Corrosion Test Champers CC1000iP

As standard, they come with the ability to create 4 distinct climates

  • Salt spray
  • Condensation humidity (wetting)
  • Air drying
  • Controlled humidity
Chamber control panel

Chamber control panel

These may be programmed to occur in any sequence and be repeated automatically. In addition, a wide range of optional accessories enables additional climates to be added to further extend the number of climates and conditions that can be created.

Đồ thị kiểm soát nhiệt độ độ ẩm buồng

Graphs of temperature control, chamber humidity

Features of Chamber CCT

  • First, chambers ‘Easy Open’ pneumatically operated canopy
  • Besides, dry seal gasket to prevent wetting the operator’s clothes
  • Low loading threshold for ergonomic loading and unloading
  • Choice of canopy color
  • Transparent lid for visual inspection (except for cold chamber accessories required)
  • Especially, automatic clean of the cabinet interior before the chamber is opened
  • Sample rack and brine tank
  • Besides, an external portable salt solution tank for ease of cleaning
  • Intuitive full-color touch-screen controller, employing the latest version of our highly intuitive operating software, for ease of programming and use
  • Next, RJ45 for logging and remote programming via a computer running ACC120 software
  • Moreover, the icon-based control interface offers a variety of languages built-in for ease of understanding and use
  • Then, a real-time, user-configurable ‘clock’ to enable different test samples to be batched and have their exposure time monitored separately, with alarms to warn when a pre-set test period has been completed.
  • As of last, the operating software has a very large capacity memory that can be created and stored in the controller’s system memory so that the widest possible range of test profiles can be accommodated.
Buồng kiểm tra ăn mòn theo chu trình CC2000iP

Cyclic Corrosion Test Champers CC2000iP

Specification of Cyclic Corrosion Test Champers

Cyclic Corrosion Equipment Specifications for Ascotts range of Equipment


Temperature range

Adjustable from ambient to +70°C / +158°F

Humidity range

Fixed at 95 % – 100 % RH


Temperature range

Adjustable from ambient to +50oC / +122oF

Salt spray fall-out rates

Adjustable from 0.5 to 2.5 ml per 80 cm² per hour


Temperature range

Adjustable from ambient to +70°C / +158°F

Humidity range


Cyclic Specifications – Performance Graph


  • CC450iP:
    450 Ltrs / 15.8 cu.ft
  • CC1000iP:
    1000 Ltrs / 35.3 cu.ft
  • CC1300iP:
    1300 Ltrs / 45.9 cu.ft
  • CC2000iP:
    2000 Ltrs / 70.6 cu.ft
  • CC2600iP:
    2600 Ltrs / 91.8 cu.ft


Floor standing


Glass reinforced plastic, Polypropylene & ABS parts


Indoor, temperature from +18oC to +23oC (+64oF to 73oF), 85% max RH (non condensing) ambient


9 standard colors


Exhaust – 3m (10ft) exhaust pipe is required which should be terminated outside building


3m (10ft) drain pipe is required which should be terminated into floor level drain

Other reference information:

Salt Spray Champers – Cyclic Corrosion Test Champers

Salt Spray Champers

error: Content is protected !!